Exclusive FKL distributor for the Slovak Republic

  1. Home
  2. Products
  3. Standard Program
  4. Y Bearing Units
  5. Housing Type N
  6. UYN 212 2S

UYN 212 2S

Y-Bearing Flanged Units With Oval Grey Cast Iron Housing "N"

60mm
d · Bore diameter
202mm
J · Pitch circle diameter
52.7kN
Cdyn · Dynamic load rating
36kN
Co · Static load rating
3.64kg
kg · Mass

Price & availability

Check the current price and stock availability of this product in our e-shop.

Check at eloziska.sk

Our e-shop · PO BEARINGS s.r.o.

Designation: UYN 212 2S

Cross references

ManufacturerDesignation / part number
INAPCJT60-N
SNRESFL212

Type equivalents according to FKL's interchange table (Ball Bearings and Bearing Units catalogue, section 3.3). Each designation has been checked for this size in that maker's own catalogue; compare the dimensions before ordering.

What the designation means

2S
One lip rubber metal seal (on both sides)
All prefixes and suffixes
UYN 212 2S

Technical specifications

Dimensions and load ratings – symbols refer to the technical drawing.

SymbolParameterValue
dBore diameter60mm
LOverall width140mm
ADistance from the housing flange to the front of the inner ring of the bearing69.3mm
A1Total housing width48mm
A2Housing flange thickness18mm
HHousing height242mm
JPitch circle diameter202mm
NDiameter of attachment slot23mm
kgMass3.64kg
CdynDynamic load rating52.7kN
CoStatic load rating36kN
PuFatigue load limit1.53kN
Sealing type

S SEAL / S SEAL (2S)

Single lip seal with the labyrinth between the sheet part and the rubber lip which conducts the contact sealing. The friction and speeds are the same as with RS but provides much better protection against the rough impurity particles. This is very good sealing system: the sheet part protects the seal from the soil, dust and rough particles. At the same time makes the labyrinth with the rubber part. The rubber part provides contact sealing which prevents penetration of finer impurities, water, moisture, steam etc. Suitable for neutral conditions because of the presence of the foreign materials. It is used with the Y bearing (standard) and deep groove ball bearings.

Overview of all sealing types
Technical drawing – UYN 212 2S
Technical drawingClick to enlarge