Exclusive FKL distributor for the Slovak Republic

  1. Home
  2. Products
  3. Standard Program
  4. Y Bearings
  5. Bearing Type LE
  6. LE 322 2F.SH

LE 322 2F.SH

Y-Ball Bearings With Grub Screw Locking

110mm
d · Bore diameter
240mm
D · Outside diameter
203kN
Cdyn · Dynamic load rating
180kN
Co · Static load rating
15.1kg
kg · Mass

Price & availability

Check the current price and stock availability of this product in our e-shop.

Check at eloziska.sk

Our e-shop · PO BEARINGS s.r.o.

Designation: LE 322 2F.SH

What the designation means

2F
One lip rubber metal seal + flinger, on both sides
SH
Cylindrical outer ring without lubrication holes
All prefixes and suffixes
LE 322 2F.SH

Technical specifications

Dimensions and load ratings – symbols refer to the technical drawing.

SymbolParameterValue
dBore diameter110mm
DOutside diameter240mm
BWidth inner ring117mm
CWidth outer ring60mm
sDistance from inner ring side face to raceway centre46mm
d1Outer diameter inner ring149mm
EDistance from raceway centre to the hole for lubrication18mm
GsSet screwM18x1.6mm
swHexagonal key size for set screw10mm
r1,2Inner ring Chamfer dimension3mm
r3,4Outside ring Chamfer dimension3mm
CdynDynamic load rating203kN
CoStatic load rating180kN
PuFatigue load limit5.7kN
kgMass15.1kg
Sealing type

F SEAL / F SEAL (2F)

Dual sealing, protection cover placed on the inner ring protects against rough impurity particles and makes the labyrinth with the sheet part of the seal; then the sealing S type, with the labyrinth between the sheet part and the rubber lip that conducts the contact sealing. The friction and speeds are the same as with S but has much better protection against rough impurity particles. It is very good sealing system: the sheet part protects the seal from the soil, dust and rough particles. At the same time makes the labyrinth with the rubber part. The rubber part provides the contact sealing that prevents the penetration of the finer impurities, water, moisture, steam etc. Suitable for heavier conditions due to better protection against foreign matters. It is used with the Y bearings (standard).

Overview of all sealing types
Technical drawing – LE 322 2F.SH
Technical drawingClick to enlarge