Exclusive FKL distributor for the Slovak Republic

  1. Home
  2. Products
  3. Standard Program
  4. Y Bearings
  5. Bearing Type LE
  6. LE 224 2F.SH

LE 224 2F.SH

Y-Ball Bearings With Grub Screw Locking

120mm
d · Bore diameter
215mm
D · Outside diameter
155kN
Cdyn · Dynamic load rating
113kN
Co · Static load rating
6.2kg
kg · Mass

Price & availability

Check the current price and stock availability of this product in our e-shop.

Check at eloziska.sk

Our e-shop · PO BEARINGS s.r.o.

Designation: LE 224 2F.SH

What the designation means

2F
One lip rubber metal seal + flinger, on both sides
SH
Cylindrical outer ring without lubrication holes
All prefixes and suffixes
LE 224 2F.SH

Technical specifications

Dimensions and load ratings – symbols refer to the technical drawing.

SymbolParameterValue
dBore diameter120mm
DOutside diameter215mm
BWidth inner ring73.5mm
CWidth outer ring40mm
sDistance from inner ring side face to raceway centre28.5mm
d1Outer diameter inner ring146.4mm
EDistance from raceway centre to the hole for lubrication14mm
GsSet screwM12x1.6mm
swHexagonal key size for set screw6mm
r1,2Inner ring Chamfer dimension2mm
r3,4Outside ring Chamfer dimension2.5mm
CdynDynamic load rating155kN
CoStatic load rating113kN
PuFatigue load limit3.9kN
kgMass6.2kg
Sealing type

F SEAL / F SEAL (2F)

Dual sealing, protection cover placed on the inner ring protects against rough impurity particles and makes the labyrinth with the sheet part of the seal; then the sealing S type, with the labyrinth between the sheet part and the rubber lip that conducts the contact sealing. The friction and speeds are the same as with S but has much better protection against rough impurity particles. It is very good sealing system: the sheet part protects the seal from the soil, dust and rough particles. At the same time makes the labyrinth with the rubber part. The rubber part provides the contact sealing that prevents the penetration of the finer impurities, water, moisture, steam etc. Suitable for heavier conditions due to better protection against foreign matters. It is used with the Y bearings (standard).

Overview of all sealing types
Technical drawing – LE 224 2F.SH
Technical drawingClick to enlarge