Exclusive FKL distributor for the Slovak Republic

  1. Home
  2. Products
  3. Standard Program
  4. Y Bearing Units
  5. Housing Type T
  6. UYT 205 2S

UYT 205 2S

Y-Bearing Take - Up Units With Grey Cast Iron Housings "T"

25mm
d · Bore diameter
100mm
L · Overall length
14kN
Cdyn · Dynamic load rating
7.8kN
Co · Static load rating
0.88kg
kg · Mass

Price & availability

Check the current price and stock availability of this product in our e-shop.

Check at eloziska.sk

Our e-shop · PO BEARINGS s.r.o.

Designation: UYT 205 2S

Cross references

ManufacturerDesignation / part number
SKFTU 25 FM
INAPTUE25
SNREST205

Type equivalents according to FKL's interchange table (Ball Bearings and Bearing Units catalogue, section 3.3). Each designation has been checked for this size in that maker's own catalogue; compare the dimensions before ordering.

What the designation means

2S
One lip rubber metal seal (on both sides)
All prefixes and suffixes
UYT 205 2S

Technical specifications

Dimensions and load ratings – symbols refer to the technical drawing.

SymbolParameterValue
dBore diameter25mm
D1Hole diameter19mm
LOverall length100mm
L1Distance from the contact surface of housing to the bearing axis64mm
L2Length of attachment slot16mm
AOverall width34mm
A1Width of location slot13.5mm
A2Housing flange thickness25mm
HHousing height91mm
H1Distance between bottoms of location slot76mm
NDiameter of attachment slot33mm
N1Length of attachment slot10mm
s1Distance from locking device side face to raceway centre23.5mm
kgMass0.88kg
CdynDynamic load rating14kN
CoStatic load rating7.8kN
PuFatigue load limit0.335kN
Sealing type

S SEAL / S SEAL (2S)

Single lip seal with the labyrinth between the sheet part and the rubber lip which conducts the contact sealing. The friction and speeds are the same as with RS but provides much better protection against the rough impurity particles. This is very good sealing system: the sheet part protects the seal from the soil, dust and rough particles. At the same time makes the labyrinth with the rubber part. The rubber part provides contact sealing which prevents penetration of finer impurities, water, moisture, steam etc. Suitable for neutral conditions because of the presence of the foreign materials. It is used with the Y bearing (standard) and deep groove ball bearings.

Overview of all sealing types
Technical drawing – UYT 205 2S
Technical drawingClick to enlarge