Exclusive FKL distributor for the Slovak Republic

  1. Home
  2. Products
  3. Standard Program
  4. Y Bearing Units
  5. Housing Type S
  6. UYS 207 2S

UYS 207 2S

Y-Bearing Plummer Block Units With Grey Cast Iron Housing "S"

35mm
d · Bore diameter
167mm
L · Overall length
25.5kN
Cdyn · Dynamic load rating
15.3kN
Co · Static load rating
1.58kg
kg · Mass

Price & availability

Check the current price and stock availability of this product in our e-shop.

Check at eloziska.sk

Our e-shop · PO BEARINGS s.r.o.

Designation: UYS 207 2S

Cross references

ManufacturerDesignation / part number
SKFSYJ35FM
INAPASE35N
SNRESPE207
SNRESP207

Part numbers of other manufacturers and original equipment (OEM) that this product corresponds to.

What the designation means

2S
One lip rubber metal seal (on both sides)
All prefixes and suffixes

Downloads

UYS 207 2S

Technical specifications

Dimensions and load ratings – symbols refer to the technical drawing.

SymbolParameterValue
dBore diameter35mm
LOverall length167mm
AHousing contact surface width46mm
A1Width of the top of the housing28mm
HHousing height92.1mm
H1Distance from the contact surface to the bearing axis47.6mm
H2Housing foot thickness17mm
JminMin. distance between the holes122mm
JmaxMax. distance between the holes136mm
NDiameter of attachment slot17mm
N1Length of attachment slot24mm
s1Distance from locking device side face to raceway centre29.4mm
kgMass1.58kg
CdynDynamic load rating25.5kN
CoStatic load rating15.3kN
PuFatigue load limit0.655kN
Sealing type

S SEAL / S SEAL (2S)

Single lip seal with the labyrinth between the sheet part and the rubber lip which conducts the contact sealing. The friction and speeds are the same as with RS but provides much better protection against the rough impurity particles. This is very good sealing system: the sheet part protects the seal from the soil, dust and rough particles. At the same time makes the labyrinth with the rubber part. The rubber part provides contact sealing which prevents penetration of finer impurities, water, moisture, steam etc. Suitable for neutral conditions because of the presence of the foreign materials. It is used with the Y bearing (standard) and deep groove ball bearings.

Overview of all sealing types
Technical drawing – UYS 207 2S
Technical drawingClick to enlarge