Exclusive FKL distributor for the Slovak Republic

  1. Home
  2. Products
  3. Standard Program
  4. Y Bearing Units
  5. Housing Type N
  6. UYN 207 2S

UYN 207 2S

Y-Bearing Flanged Units With Oval Grey Cast Iron Housing "N"

35mm
d · Bore diameter
130mm
J · Pitch circle diameter
25.5kN
Cdyn · Dynamic load rating
15.3kN
Co · Static load rating
1.32kg
kg · Mass

Price & availability

Check the current price and stock availability of this product in our e-shop.

Check at eloziska.sk

Our e-shop · PO BEARINGS s.r.o.

Designation: UYN 207 2S

Cross references

ManufacturerDesignation / part number
SKFFYTB 35 FM
INAPCJT35-N
SNRESFL207

Type equivalents according to FKL's interchange table (Ball Bearings and Bearing Units catalogue, section 3.3). Each designation has been checked for this size in that maker's own catalogue; compare the dimensions before ordering.

What the designation means

2S
One lip rubber metal seal (on both sides)
All prefixes and suffixes
UYN 207 2S

Technical specifications

Dimensions and load ratings – symbols refer to the technical drawing.

SymbolParameterValue
dBore diameter35mm
LOverall width96mm
ADistance from the housing flange to the front of the inner ring of the bearing48.4mm
A1Total housing width34mm
A2Housing flange thickness16mm
HHousing height161mm
JPitch circle diameter130mm
NDiameter of attachment slot16mm
kgMass1.32kg
CdynDynamic load rating25.5kN
CoStatic load rating15.3kN
PuFatigue load limit0.655kN
Sealing type

S SEAL / S SEAL (2S)

Single lip seal with the labyrinth between the sheet part and the rubber lip which conducts the contact sealing. The friction and speeds are the same as with RS but provides much better protection against the rough impurity particles. This is very good sealing system: the sheet part protects the seal from the soil, dust and rough particles. At the same time makes the labyrinth with the rubber part. The rubber part provides contact sealing which prevents penetration of finer impurities, water, moisture, steam etc. Suitable for neutral conditions because of the presence of the foreign materials. It is used with the Y bearing (standard) and deep groove ball bearings.

Overview of all sealing types
Technical drawing – UYN 207 2S
Technical drawingClick to enlarge