Exclusive FKL distributor for the Slovak Republic

  1. Home
  2. Products
  3. Standard Program
  4. Y Bearings
  5. Bearing Type UK
  6. UK 210 2S+H 210

UK 210 2S+H 210

Y-Ball Bearings With Tapered Bore

50mm
d · Bore diameter
90mm
D · Outside diameter
35kN
Cdyn · Dynamic load rating
23.2kN
Co · Static load rating
0.44kg
kg · Mass

Price & availability

Check the current price and stock availability of this product in our e-shop.

Check at eloziska.sk

Our e-shop · PO BEARINGS s.r.o.

Designation: UK 210 2S+H 210

What the designation means

2S
One lip rubber metal seal (on both sides)
H
No lubrication hole
All prefixes and suffixes
UK 210 2S+H 210

Technical specifications

Dimensions and load ratings – symbols refer to the technical drawing.

SymbolParameterValue
dBore diameter50mm
DOutside diameter90mm
BWidth inner ring20mm
CWidth outer ring20mm
d1Outer diameter inner ring62.5mm
EDistance from raceway centre to the hole for lubrication6.4mm
d2Bore diameter-adapter sleeve45mm
D1Hole diameter78.2mm
LWidth adapter sleeve55mm
WKM nut outside diameter70mm
YKM nut width12mm
CdynDynamic load rating35kN
CoStatic load rating23.2kN
PuFatigue load limit0.695kN
kgMass0.44kg
Sealing type

S SEAL / S SEAL (2S)

Single lip seal with the labyrinth between the sheet part and the rubber lip which conducts the contact sealing. The friction and speeds are the same as with RS but provides much better protection against the rough impurity particles. This is very good sealing system: the sheet part protects the seal from the soil, dust and rough particles. At the same time makes the labyrinth with the rubber part. The rubber part provides contact sealing which prevents penetration of finer impurities, water, moisture, steam etc. Suitable for neutral conditions because of the presence of the foreign materials. It is used with the Y bearing (standard) and deep groove ball bearings.

Overview of all sealing types
Technical drawing – UK 210 2S+H 210
Technical drawingClick to enlarge