Exclusive FKL distributor for the Slovak Republic

  1. Home
  2. Products
  3. Special Program for Agriculture
  4. For Harvester
  5. UH 211HD/50 2S.H.T

UH 211HD/50 2S.H.T

Y-Ball Bearings With Integral Adapter Sleeve

Application:Harvester

50mm
d · Bore diameter
100mm
D · Outside diameter
48.8kN
Cdyn · Dynamic load rating
31.75kN
Co · Static load rating
1.16kg
kg · Mass

Price & availability

Check the current price and stock availability of this product in our e-shop.

Check at eloziska.sk

Our e-shop · PO BEARINGS s.r.o.

Designation: UH 211HD/50 2S.H.T

Cross references

ManufacturerDesignation / part number
Ростсельмаш КЗUH 211HD/50 2S.H.T

Part numbers of other manufacturers and original equipment (OEM) that this product corresponds to.

What the designation means

2S
One lip rubber metal seal (on both sides)
H
No lubrication hole
T
Outer ring with stopping pin
All prefixes and suffixes
UH 211HD/50 2S.H.T

Technical specifications

Dimensions and load ratings – symbols refer to the technical drawing.

SymbolParameterValue
dBore diameter50mm
DOutside diameter100mm
WKM nut outside diameter75mm
D2MB Washer outside diameter81mm
BWidth inner ring25mm
B1Width adapter sleeve45mm
CWidth outer ring25mm
LKM nut width11mm
E1Distance from raceway center to the stopping pin7mm
MThread adapter sleeveM55x2mm
PStopping pin diameter3mm
P1Stopping pin higth2mm
kgMass1.16kg
CdynDynamic load rating48.8kN
CoStatic load rating31.75kN
PuFatigue load limit1.334kN
Sealing type

S SEAL / S SEAL (2S)

Single lip seal with the labyrinth between the sheet part and the rubber lip which conducts the contact sealing. The friction and speeds are the same as with RS but provides much better protection against the rough impurity particles. This is very good sealing system: the sheet part protects the seal from the soil, dust and rough particles. At the same time makes the labyrinth with the rubber part. The rubber part provides contact sealing which prevents penetration of finer impurities, water, moisture, steam etc. Suitable for neutral conditions because of the presence of the foreign materials. It is used with the Y bearing (standard) and deep groove ball bearings.

Overview of all sealing types
Technical drawing – UH 211HD/50 2S.H.T
Technical drawingClick to enlarge