Exclusive FKL distributor for the Slovak Republic

  1. Home
  2. Products
  3. Standard Program
  4. Y Bearing Units
  5. Housing Type N
  6. UEN 203 2S

UEN 203 2S

Y-Bearing Flanged Units With Oval Grey Cast Iron Housing "N"

17mm
d · Bore diameter
76.5mm
J · Pitch circle diameter
9.56kN
Cdyn · Dynamic load rating
4.75kN
Co · Static load rating
0.37kg
kg · Mass

Price & availability

Check the current price and stock availability of this product in our e-shop.

Check at eloziska.sk

Our e-shop · PO BEARINGS s.r.o.

Designation: UEN 203 2S

Cross references

ManufacturerDesignation / part number
INAPCJTY17
SNRUSFL203

Type equivalents according to FKL's interchange table (Ball Bearings and Bearing Units catalogue, section 3.3). Each designation has been checked for this size in that maker's own catalogue; compare the dimensions before ordering.

What the designation means

2S
One lip rubber metal seal (on both sides)
All prefixes and suffixes
UEN 203 2S

Technical specifications

Dimensions and load ratings – symbols refer to the technical drawing.

SymbolParameterValue
dBore diameter17mm
LOverall width57mm
ADistance from the housing flange to the front of the inner ring of the bearing32.9mm
A1Total housing width26mm
A2Housing flange thickness11mm
HHousing height98.5mm
JPitch circle diameter76.5mm
NDiameter of attachment slot11.5mm
kgMass0.37kg
CdynDynamic load rating9.56kN
CoStatic load rating4.75kN
PuFatigue load limit0.2kN
Sealing type

S SEAL / S SEAL (2S)

Single lip seal with the labyrinth between the sheet part and the rubber lip which conducts the contact sealing. The friction and speeds are the same as with RS but provides much better protection against the rough impurity particles. This is very good sealing system: the sheet part protects the seal from the soil, dust and rough particles. At the same time makes the labyrinth with the rubber part. The rubber part provides contact sealing which prevents penetration of finer impurities, water, moisture, steam etc. Suitable for neutral conditions because of the presence of the foreign materials. It is used with the Y bearing (standard) and deep groove ball bearings.

Overview of all sealing types
Technical drawing – UEN 203 2S
Technical drawingClick to enlarge