Exclusive FKL distributor for the Slovak Republic

  1. Home
  2. Products
  3. Special Program for Agriculture
  4. For Packer Baler
  5. SLE 206-103 2F

SLE 206-103 2F

Ball Bearing

Application:Mower

30.162mm
d · Bore diameter
62mm
D · Outside diameter
19.5kN
Cdyn · Dynamic load rating
11.3kN
Co · Static load rating
0.28kg
kg · Mass

Price & availability

Check the current price and stock availability of this product in our e-shop.

Check at eloziska.sk

Our e-shop · PO BEARINGS s.r.o.

Designation: SLE 206-103 2F

Cross references

ManufacturerDesignation / part number
SKFBBY-0104

Part numbers of other manufacturers and original equipment (OEM) that this product corresponds to.

What the designation means

SLE
Special Ball Bearing
2F
One lip rubber metal seal + flinger, on both sides
All prefixes and suffixes

Downloads

SLE 206-103 2F

Technical specifications

Dimensions and load ratings – symbols refer to the technical drawing.

SymbolParameterValue
dBore diameter30.162mm
DOutside diameter62mm
BWidth inner ring38.1mm
CWidth outer ring18mm
sDistance from inner ring side face to raceway centre15.9mm
d1Outer diameter inner ring39.7mm
B4Distance face to hole center5.5mm
HHole diameter7mm
r1,2Inner ring Chamfer dimension0.6mm
r3,4Outside ring Chamfer dimension0.8mm
CdynDynamic load rating19.5kN
CoStatic load rating11.3kN
PuFatigue load limit0.475kN
kgMass0.28kg
Sealing type

F SEAL / F SEAL (2F)

Dual sealing, protection cover placed on the inner ring protects against rough impurity particles and makes the labyrinth with the sheet part of the seal; then the sealing S type, with the labyrinth between the sheet part and the rubber lip that conducts the contact sealing. The friction and speeds are the same as with S but has much better protection against rough impurity particles. It is very good sealing system: the sheet part protects the seal from the soil, dust and rough particles. At the same time makes the labyrinth with the rubber part. The rubber part provides the contact sealing that prevents the penetration of the finer impurities, water, moisture, steam etc. Suitable for heavier conditions due to better protection against foreign matters. It is used with the Y bearings (standard).

Overview of all sealing types
Technical drawing – SLE 206-103 2F
Technical drawingClick to enlarge