Exclusive FKL distributor for the Slovak Republic

  1. Home
  2. Products
  3. Standard Program
  4. Y Bearing Units
  5. Housing Type G
  6. LYG 209 2F

LYG 209 2F

Y-Bearing Flanged Units With Round Grey Cast Iron Housing "G"

45mm
d · Bore diameter
132mm
J · Pitch circle diameter
33.2kN
Cdyn · Dynamic load rating
21.6kN
Co · Static load rating
2.76kg
kg · Mass

Price & availability

Check the current price and stock availability of this product in our e-shop.

Check at eloziska.sk

Our e-shop · PO BEARINGS s.r.o.

Designation: LYG 209 2F

Cross references

ManufacturerDesignation / part number
INARME45
SNREXFC209
NTNUELFC209D1W3

Type equivalents according to FKL's interchange table (Ball Bearings and Bearing Units catalogue, section 3.3). Each designation has been checked for this size in that maker's own catalogue; compare the dimensions before ordering.

What the designation means

2F
One lip rubber metal seal + flinger, on both sides
All prefixes and suffixes
LYG 209 2F

Technical specifications

Dimensions and load ratings – symbols refer to the technical drawing.

SymbolParameterValue
dBore diameter45mm
DaCentering diameter105mm
LOverall width160mm
ADistance from the housing flange to the front of the inner ring of the bearing44.9mm
A1Total housing width38mm
A2Housing flange thickness14mm
A3Centering diameter height12mm
JPitch circle diameter132mm
J1Distance between the holes93.3mm
NDiameter of attachment slot16mm
kgMass2.76kg
CdynDynamic load rating33.2kN
CoStatic load rating21.6kN
PuFatigue load limit0.915kN
Sealing type

F SEAL / F SEAL (2F)

Dual sealing, protection cover placed on the inner ring protects against rough impurity particles and makes the labyrinth with the sheet part of the seal; then the sealing S type, with the labyrinth between the sheet part and the rubber lip that conducts the contact sealing. The friction and speeds are the same as with S but has much better protection against rough impurity particles. It is very good sealing system: the sheet part protects the seal from the soil, dust and rough particles. At the same time makes the labyrinth with the rubber part. The rubber part provides the contact sealing that prevents the penetration of the finer impurities, water, moisture, steam etc. Suitable for heavier conditions due to better protection against foreign matters. It is used with the Y bearings (standard).

Overview of all sealing types
Technical drawing – LYG 209 2F
Technical drawingClick to enlarge