PhotoLYF 210 2F
Y-Bearing Flanged Units With Square Grey Cast Iron Housing "F"
Price & availability
Check the current price and stock availability of this product in our e-shop.
Check at eloziska.skOur e-shop · PO BEARINGS s.r.o.
LYF 210 2F
Cross references
| Manufacturer | Designation / part number |
|---|---|
| ROPA | 240059 |
Part numbers of other manufacturers and original equipment (OEM) that this product corresponds to.
Bearing makers' type equivalents
| Manufacturer | Designation / part number |
|---|---|
| SKF | FY 50 WF |
| INA | RCJ50-N |
| SNR | EXF210 |
| NTN | UELF210D1W3 |
Type equivalents according to FKL's interchange table (Ball Bearings and Bearing Units catalogue, section 3.3). Each designation has been checked for this size in that maker's own catalogue; compare the dimensions before ordering.
What the designation means
2F- One lip rubber metal seal + flinger, on both sides
Technical specifications
Dimensions and load ratings – symbols refer to the technical drawing.
| Symbol | Parameter | Value |
|---|---|---|
| d | Bore diameter | 50mm |
| L | Overall width | 143mm |
| A | Distance from the housing flange to the front of the inner ring of the bearing | 60.1mm |
| A1 | Total housing width | 40mm |
| A2 | Housing flange thickness | 15mm |
| J | Pitch circle diameter | 111mm |
| N | Diameter of attachment slot | 16mm |
| kg | Mass | 2.76kg |
| Cdyn | Dynamic load rating | 35.1kN |
| Co | Static load rating | 23.2kN |
| Pu | Fatigue load limit | 0.98kN |
F SEAL / F SEAL (2F)
Dual sealing, protection cover placed on the inner ring protects against rough impurity particles and makes the labyrinth with the sheet part of the seal; then the sealing S type, with the labyrinth between the sheet part and the rubber lip that conducts the contact sealing. The friction and speeds are the same as with S but has much better protection against rough impurity particles. It is very good sealing system: the sheet part protects the seal from the soil, dust and rough particles. At the same time makes the labyrinth with the rubber part. The rubber part provides the contact sealing that prevents the penetration of the finer impurities, water, moisture, steam etc. Suitable for heavier conditions due to better protection against foreign matters. It is used with the Y bearings (standard).
Overview of all sealing types
More products in this category
View entire category · Housing Type F (83)
LSF 209 2F
Y-Bearing Flanged Units With Square Grey Cast Iron Housing "F"
LKF 210 2F + H2310
Y-Bearing Flanged Units With Square Grey Cast Iron Housing "F"
UEF 210 2F
Y-Bearing Flanged Units With Square Grey Cast Iron Housing "F"
LEF 210 2F
Y-Bearing Flanged Units With Square Grey Cast Iron Housing "F"
UYF 210 2S
Y-Bearing Flanged Units With Square Grey Cast Iron Housing "F"
LSF 210 2F
Y-Bearing Flanged Units With Square Grey Cast Iron Housing "F"
LKF 211 2F + H2311
Y-Bearing Flanged Units With Square Grey Cast Iron Housing "F"
LEF 211 2F
Y-Bearing Flanged Units With Square Grey Cast Iron Housing "F"
UYF 211 2S
Y-Bearing Flanged Units With Square Grey Cast Iron Housing "F"
LYF 211 2F
Y-Bearing Flanged Units With Square Grey Cast Iron Housing "F"