Exclusive FKL distributor for the Slovak Republic

  1. Home
  2. Products
  3. Standard Program
  4. Y Bearing Units
  5. Housing Type F
  6. LYF 207-107 2F

LYF 207-107 2F

Y-Bearing Flanged Units With Square Grey Cast Iron Housing "F"

36.513mm
d · Bore diameter
92mm
J · Distance between the holes
25.5kN
Cdyn · Dynamic load rating
15.3kN
Co · Static load rating
1.47kg
kg · Mass

Price & availability

Check the current price and stock availability of this product in our e-shop.

Check at eloziska.sk

Our e-shop · PO BEARINGS s.r.o.

Designation: LYF 207-107 2F

Cross references

ManufacturerDesignation / part number
JOHN DEEREAN85109
JOHN DEEREAN103096

Part numbers of other manufacturers and original equipment (OEM) that this product corresponds to.

Bearing makers' type equivalents

ManufacturerDesignation / part number
NTNUELF207-107D1W3

Type equivalents according to FKL's interchange table (Ball Bearings and Bearing Units catalogue, section 3.3). Each designation has been checked for this size in that maker's own catalogue; compare the dimensions before ordering.

What the designation means

2F
One lip rubber metal seal + flinger, on both sides
All prefixes and suffixes
LYF 207-107 2F

Technical specifications

Dimensions and load ratings – symbols refer to the technical drawing.

SymbolParameterValue
dBore diameter36.513mm
LOverall width118mm
ADistance from the housing flange to the front of the inner ring of the bearing51.3mm
A1Total housing width34mm
A2Housing flange thickness13mm
JDistance between the holes92mm
NDiameter of attachment slot14mm
kgMass1.47kg
CdynDynamic load rating25.5kN
CoStatic load rating15.3kN
PuFatigue load limit0.655kN
Sealing type

F SEAL / F SEAL (2F)

Dual sealing, protection cover placed on the inner ring protects against rough impurity particles and makes the labyrinth with the sheet part of the seal; then the sealing S type, with the labyrinth between the sheet part and the rubber lip that conducts the contact sealing. The friction and speeds are the same as with S but has much better protection against rough impurity particles. It is very good sealing system: the sheet part protects the seal from the soil, dust and rough particles. At the same time makes the labyrinth with the rubber part. The rubber part provides the contact sealing that prevents the penetration of the finer impurities, water, moisture, steam etc. Suitable for heavier conditions due to better protection against foreign matters. It is used with the Y bearings (standard).

Overview of all sealing types
Technical drawing – LYF 207-107 2F
Technical drawingClick to enlarge