Exclusive FKL distributor for the Slovak Republic

  1. Home
  2. Products
  3. Standard Program
  4. Y Bearings
  5. Bearing Type LY
  6. LY 218 2F.SH

LY 218 2F.SH

Y-Ball Bearings With Eccentric Locking Collar

90mm
d · Bore diameter
160mm
D · Outside diameter
95.6kN
Cdyn · Dynamic load rating
72kN
Co · Static load rating
5.11kg
kg · Mass

Price & availability

Check the current price and stock availability of this product in our e-shop.

Check at eloziska.sk

Our e-shop · PO BEARINGS s.r.o.

Designation: LY 218 2F.SH

What the designation means

2F
One lip rubber metal seal + flinger, on both sides
SH
Cylindrical outer ring without lubrication holes
All prefixes and suffixes
LY 218 2F.SH

Technical specifications

Dimensions and load ratings – symbols refer to the technical drawing.

SymbolParameterValue
dBore diameter90mm
DOutside diameter160mm
BWidth inner ring106.4mm
CWidth outer ring36mm
sDistance from inner ring side face to raceway centre43.6mm
d1Outer diameter inner ring112.5mm
EDistance from raceway centre to the hole for lubrication10mm
GsSet screwM12x1.6mm
swHexagonal key size for set screw6mm
r1,2Inner ring Chamfer dimension2mm
r3,4Outside ring Chamfer dimension2.5mm
B1Width inner ring with locking collar88.2mm
d2Locking collar outside diameter123.7mm
B2Width locking collar25.2mm
CdynDynamic load rating95.6kN
CoStatic load rating72kN
PuFatigue load limit2.7kN
kgMass5.11kg
Sealing type

F SEAL / F SEAL (2F)

Dual sealing, protection cover placed on the inner ring protects against rough impurity particles and makes the labyrinth with the sheet part of the seal; then the sealing S type, with the labyrinth between the sheet part and the rubber lip that conducts the contact sealing. The friction and speeds are the same as with S but has much better protection against rough impurity particles. It is very good sealing system: the sheet part protects the seal from the soil, dust and rough particles. At the same time makes the labyrinth with the rubber part. The rubber part provides the contact sealing that prevents the penetration of the finer impurities, water, moisture, steam etc. Suitable for heavier conditions due to better protection against foreign matters. It is used with the Y bearings (standard).

Overview of all sealing types
Technical drawing – LY 218 2F.SH
Technical drawingClick to enlarge