Exclusive FKL distributor for the Slovak Republic

  1. Home
  2. Products
  3. Standard Program
  4. Y Bearings
  5. Bearing Type LY
  6. LY 210 2F.SH

LY 210 2F.SH

Y-Ball Bearings With Eccentric Locking Collar

50mm
d · Bore diameter
90mm
D · Outside diameter
35.1kN
Cdyn · Dynamic load rating
23.2kN
Co · Static load rating
0.91kg
kg · Mass

Price & availability

Check the current price and stock availability of this product in our e-shop.

Check at eloziska.sk

Our e-shop · PO BEARINGS s.r.o.

Designation: LY 210 2F.SH

Cross references

ManufacturerDesignation / part number
INAE50-KRR
SNRCEX210

Type equivalents according to FKL's interchange table (Ball Bearings and Bearing Units catalogue, section 3.3). Each designation has been checked for this size in that maker's own catalogue; compare the dimensions before ordering.

What the designation means

2F
One lip rubber metal seal + flinger, on both sides
SH
Cylindrical outer ring without lubrication holes
All prefixes and suffixes
LY 210 2F.SH

Technical specifications

Dimensions and load ratings – symbols refer to the technical drawing.

SymbolParameterValue
dBore diameter50mm
DOutside diameter90mm
BWidth inner ring49.2mm
CWidth outer ring22mm
sDistance from inner ring side face to raceway centre24.6mm
d1Outer diameter inner ring62.5mm
EDistance from raceway centre to the hole for lubrication6.4mm
GsSet screwM10x2mm
swHexagonal key size for set screw5mm
r1,2Inner ring Chamfer dimension1mm
r3,4Outside ring Chamfer dimension1.5mm
B1Width inner ring with locking collar62.7mm
d2Locking collar outside diameter67.6mm
B2Width locking collar18.3mm
CdynDynamic load rating35.1kN
CoStatic load rating23.2kN
PuFatigue load limit0.98kN
kgMass0.91kg
Sealing type

F SEAL / F SEAL (2F)

Dual sealing, protection cover placed on the inner ring protects against rough impurity particles and makes the labyrinth with the sheet part of the seal; then the sealing S type, with the labyrinth between the sheet part and the rubber lip that conducts the contact sealing. The friction and speeds are the same as with S but has much better protection against rough impurity particles. It is very good sealing system: the sheet part protects the seal from the soil, dust and rough particles. At the same time makes the labyrinth with the rubber part. The rubber part provides the contact sealing that prevents the penetration of the finer impurities, water, moisture, steam etc. Suitable for heavier conditions due to better protection against foreign matters. It is used with the Y bearings (standard).

Overview of all sealing types
Technical drawing – LY 210 2F.SH
Technical drawingClick to enlarge