Exclusive FKL distributor for the Slovak Republic

  1. Home
  2. Products
  3. Standard Program
  4. Y Bearings
  5. Bearing Type LY
  6. LY 207 2F

LY 207 2F

Y-Ball Bearings With Eccentric Locking Collar

35mm
d · Bore diameter
72mm
D · Outside diameter
25.5kN
Cdyn · Dynamic load rating
15.3kN
Co · Static load rating
0.57kg
kg · Mass

Price & availability

Check the current price and stock availability of this product in our e-shop.

Check at eloziska.sk

Our e-shop · PO BEARINGS s.r.o.

Designation: LY 207 2F

Cross references

ManufacturerDesignation / part number
ROPA240175
CASE97069372
CLAAS216558.0
CLAAS215475.1
CLAAS211423.0
NEW HOLLAND80212606
NEW HOLLAND80212607
NEW HOLLAND87605590
NEW HOLLAND84814912
NEW HOLLAND756965
JOHN DEEREAZ10020
JOHN DEEREJD39104/AZ10045
JOHN DEEREAH139296
JOHN DEEREAH129420
JOHN DEEREJD39104/AZ10020
FAG36207B
INAGE35KRRB
NTNUEL207
NSKEW207
CLAAS84334507
CLAAS87605592
GRIMMEB96.00364
Holmer1098001755
SNREX207G2
SKFYEL207-2F.Y
PTIHC 207X35MM
UNIA1031173
FAFNIRGE35KRRB
NEW HOLLAND21606

Part numbers of other manufacturers and original equipment (OEM) that this product corresponds to.

What the designation means

2F
One lip rubber metal seal + flinger, on both sides
All prefixes and suffixes

Downloads

LY 207 2F

Technical specifications

Dimensions and load ratings – symbols refer to the technical drawing.

SymbolParameterValue
dBore diameter35mm
DOutside diameter72mm
BWidth inner ring37.6mm
CWidth outer ring19mm
sDistance from inner ring side face to raceway centre18.8mm
d1Outer diameter inner ring46.1mm
EDistance from raceway centre to the hole for lubrication5.6mm
GsSet screwM10x1mm
swHexagonal key size for set screw5mm
r1,2Inner ring Chamfer dimension1mm
r3,4Outside ring Chamfer dimension1mm
B1Width inner ring with locking collar51.1mm
d2Locking collar outside diameter51.2mm
B2Width locking collar17.5mm
CdynDynamic load rating25.5kN
CoStatic load rating15.3kN
PuFatigue load limit0.66kN
kgMass0.57kg
Sealing type

F SEAL / F SEAL (2F)

Dual sealing, protection cover placed on the inner ring protects against rough impurity particles and makes the labyrinth with the sheet part of the seal; then the sealing S type, with the labyrinth between the sheet part and the rubber lip that conducts the contact sealing. The friction and speeds are the same as with S but has much better protection against rough impurity particles. It is very good sealing system: the sheet part protects the seal from the soil, dust and rough particles. At the same time makes the labyrinth with the rubber part. The rubber part provides the contact sealing that prevents the penetration of the finer impurities, water, moisture, steam etc. Suitable for heavier conditions due to better protection against foreign matters. It is used with the Y bearings (standard).

Overview of all sealing types
Technical drawing – LY 207 2F
Technical drawingClick to enlarge