Exclusive FKL distributor for the Slovak Republic

  1. Home
  2. Products
  3. Standard Program
  4. Y Bearings
  5. Bearing Type LY
  6. LY 204 2F.SH

LY 204 2F.SH

Y-Ball Bearings With Eccentric Locking Collar

20mm
d · Bore diameter
47mm
D · Outside diameter
12.7kN
Cdyn · Dynamic load rating
6.55kN
Co · Static load rating
0.19kg
kg · Mass

Price & availability

Check the current price and stock availability of this product in our e-shop.

Check at eloziska.sk

Our e-shop · PO BEARINGS s.r.o.

Designation: LY 204 2F.SH

Cross references

ManufacturerDesignation / part number
INAE20-KRR
SNRCEX204

Type equivalents according to FKL's interchange table (Ball Bearings and Bearing Units catalogue, section 3.3). Each designation has been checked for this size in that maker's own catalogue; compare the dimensions before ordering.

What the designation means

2F
One lip rubber metal seal + flinger, on both sides
SH
Cylindrical outer ring without lubrication holes
All prefixes and suffixes
LY 204 2F.SH

Technical specifications

Dimensions and load ratings – symbols refer to the technical drawing.

SymbolParameterValue
dBore diameter20mm
DOutside diameter47mm
BWidth inner ring43.7mm
CWidth outer ring14mm
sDistance from inner ring side face to raceway centre17.1mm
d1Outer diameter inner ring28.2mm
EDistance from raceway centre to the hole for lubrication4.3mm
GsSet screwM6x0.76mm
swHexagonal key size for set screw3mm
r1,2Inner ring Chamfer dimension0.6mm
r3,4Outside ring Chamfer dimension0.6mm
B1Width inner ring with locking collar34.1mm
d2Locking collar outside diameter33mm
B2Width locking collar13.5mm
CdynDynamic load rating12.7kN
CoStatic load rating6.55kN
PuFatigue load limit0.28kN
kgMass0.19kg
Sealing type

F SEAL / F SEAL (2F)

Dual sealing, protection cover placed on the inner ring protects against rough impurity particles and makes the labyrinth with the sheet part of the seal; then the sealing S type, with the labyrinth between the sheet part and the rubber lip that conducts the contact sealing. The friction and speeds are the same as with S but has much better protection against rough impurity particles. It is very good sealing system: the sheet part protects the seal from the soil, dust and rough particles. At the same time makes the labyrinth with the rubber part. The rubber part provides the contact sealing that prevents the penetration of the finer impurities, water, moisture, steam etc. Suitable for heavier conditions due to better protection against foreign matters. It is used with the Y bearings (standard).

Overview of all sealing types
Technical drawing – LY 204 2F.SH
Technical drawingClick to enlarge