Exclusive FKL distributor for the Slovak Republic

  1. Home
  2. Products
  3. Standard Program
  4. Y Bearing Units
  5. Housing Type U
  6. LKU 210 2F + H2310

LKU 210 2F + H2310

Y-Bearing Plummer Block Units With Grey Cast Iron Housing "U"

45mm
d · Bore diameter
101.6mm
J · Pitch circle diameter
35kN
Cdyn · Dynamic load rating
23.2kN
Co · Static load rating
2.53kg
kg · Mass

Price & availability

Check the current price and stock availability of this product in our e-shop.

Check at eloziska.sk

Our e-shop · PO BEARINGS s.r.o.

Designation: LKU 210 2F + H2310

Cross references

ManufacturerDesignation / part number
SNRUKPAE210H

Type equivalents according to FKL's interchange table (Ball Bearings and Bearing Units catalogue, section 3.3). Each designation has been checked for this size in that maker's own catalogue; compare the dimensions before ordering.

What the designation means

2F
One lip rubber metal seal + flinger, on both sides
All prefixes and suffixes
LKU 210 2F + H2310

Technical specifications

Dimensions and load ratings – symbols refer to the technical drawing.

SymbolParameterValue
dBore diameter45mm
LOverall length135mm
AHousing contact surface width54mm
A1Width of the top of the housing34mm
HHousing height113.2mm
H1Distance from the contact surface to the bearing axis57.2mm
JPitch circle diameter101.6mm
GThreadM16mm
G1Thread length25.5mm
s1Distance from locking device side face to raceway centre30.5mm
kgMass2.53kg
CdynDynamic load rating35kN
CoStatic load rating23.2kN
PuFatigue load limit0.695kN
Sealing type

F SEAL / F SEAL (2F)

Dual sealing, protection cover placed on the inner ring protects against rough impurity particles and makes the labyrinth with the sheet part of the seal; then the sealing S type, with the labyrinth between the sheet part and the rubber lip that conducts the contact sealing. The friction and speeds are the same as with S but has much better protection against rough impurity particles. It is very good sealing system: the sheet part protects the seal from the soil, dust and rough particles. At the same time makes the labyrinth with the rubber part. The rubber part provides the contact sealing that prevents the penetration of the finer impurities, water, moisture, steam etc. Suitable for heavier conditions due to better protection against foreign matters. It is used with the Y bearings (standard).

Overview of all sealing types
Technical drawing – LKU 210 2F + H2310
Technical drawingClick to enlarge