Exclusive FKL distributor for the Slovak Republic

  1. Home
  2. Products
  3. Standard Program
  4. Y Bearing Units
  5. Housing Type F
  6. LKF 209 2F + H2309

LKF 209 2F + H2309

Y-Bearing Flanged Units With Square Grey Cast Iron Housing "F"

40mm
d · Bore diameter
105mm
J · Pitch circle diameter
32.5kN
Cdyn · Dynamic load rating
20.4kN
Co · Static load rating
2.1kg
kg · Mass

Price & availability

Check the current price and stock availability of this product in our e-shop.

Check at eloziska.sk

Our e-shop · PO BEARINGS s.r.o.

Designation: LKF 209 2F + H2309

Cross references

ManufacturerDesignation / part number
Ростсельмаш КЗLKF 209 2F + H2309

Part numbers of other manufacturers and original equipment (OEM) that this product corresponds to.

Bearing makers' type equivalents

ManufacturerDesignation / part number
SKFFYJ 45 KF + H 2309
SNRUKF209H
NTNUKF209D1;H2309X
FAGUKF209 + H2309X

Type equivalents according to FKL's interchange table (Ball Bearings and Bearing Units catalogue, section 3.3). Each designation has been checked for this size in that maker's own catalogue; compare the dimensions before ordering.

What the designation means

2F
One lip rubber metal seal + flinger, on both sides
All prefixes and suffixes

Downloads

LKF 209 2F + H2309

Technical specifications

Dimensions and load ratings – symbols refer to the technical drawing.

SymbolParameterValue
dBore diameter40mm
LOverall width137mm
ADistance from the housing flange to the front of the inner ring of the bearing50.5mm
A1Total housing width38mm
A2Housing flange thickness16mm
JPitch circle diameter105mm
NDiameter of attachment slot16mm
kgMass2.1kg
CdynDynamic load rating32.5kN
CoStatic load rating20.4kN
PuFatigue load limit0.64kN
Sealing type

F SEAL / F SEAL (2F)

Dual sealing, protection cover placed on the inner ring protects against rough impurity particles and makes the labyrinth with the sheet part of the seal; then the sealing S type, with the labyrinth between the sheet part and the rubber lip that conducts the contact sealing. The friction and speeds are the same as with S but has much better protection against rough impurity particles. It is very good sealing system: the sheet part protects the seal from the soil, dust and rough particles. At the same time makes the labyrinth with the rubber part. The rubber part provides the contact sealing that prevents the penetration of the finer impurities, water, moisture, steam etc. Suitable for heavier conditions due to better protection against foreign matters. It is used with the Y bearings (standard).

Overview of all sealing types
Technical drawing – LKF 209 2F + H2309
Technical drawingClick to enlarge