Exclusive FKL distributor for the Slovak Republic

  1. Home
  2. Products
  3. Standard Program
  4. Y Bearing Units
  5. Housing Type G
  6. LEG 213 2F

LEG 213 2F

Y-Bearing Flanged Units With Round Grey Cast Iron Housing "G"

65mm
d · Bore diameter
170mm
J · Pitch circle diameter
57.2kN
Cdyn · Dynamic load rating
40kN
Co · Static load rating
5.85kg
kg · Mass

Price & availability

Check the current price and stock availability of this product in our e-shop.

Check at eloziska.sk

Our e-shop · PO BEARINGS s.r.o.

Designation: LEG 213 2F

Cross references

ManufacturerDesignation / part number
SKFFYC65TF
NSKUCFC213
INARMEY65
SNRUCFC213
FAGUCFC213J7
NTNM-UCFC213D1
ЯрославичLEG 213 2F
ООО ЗапагромашLEG 213 2F

Part numbers of other manufacturers and original equipment (OEM) that this product corresponds to.

What the designation means

2F
One lip rubber metal seal + flinger, on both sides
All prefixes and suffixes

Downloads

LEG 213 2F

Technical specifications

Dimensions and load ratings – symbols refer to the technical drawing.

SymbolParameterValue
dBore diameter65mm
DaCentering diameter145mm
LOverall width205mm
ADistance from the housing flange to the front of the inner ring of the bearing58.9mm
A1Total housing width50mm
A2Housing flange thickness15mm
A3Centering diameter height14mm
JPitch circle diameter170mm
J1Distance between the holes120.2mm
NDiameter of attachment slot19mm
kgMass5.85kg
CdynDynamic load rating57.2kN
CoStatic load rating40kN
PuFatigue load limit1.7kN
Sealing type

F SEAL / F SEAL (2F)

Dual sealing, protection cover placed on the inner ring protects against rough impurity particles and makes the labyrinth with the sheet part of the seal; then the sealing S type, with the labyrinth between the sheet part and the rubber lip that conducts the contact sealing. The friction and speeds are the same as with S but has much better protection against rough impurity particles. It is very good sealing system: the sheet part protects the seal from the soil, dust and rough particles. At the same time makes the labyrinth with the rubber part. The rubber part provides the contact sealing that prevents the penetration of the finer impurities, water, moisture, steam etc. Suitable for heavier conditions due to better protection against foreign matters. It is used with the Y bearings (standard).

Overview of all sealing types
Technical drawing – LEG 213 2F
Technical drawingClick to enlarge