Exclusive FKL distributor for the Slovak Republic

  1. Home
  2. Products
  3. Standard Program
  4. Y Bearing Units
  5. Housing Type F
  6. LEF 205 2F

LEF 205 2F

Y-Bearing Flanged Units With Square Grey Cast Iron Housing "F"

25mm
d · Bore diameter
70mm
J · Pitch circle diameter
14kN
Cdyn · Dynamic load rating
7.8kN
Co · Static load rating
0.73kg
kg · Mass

Price & availability

Check the current price and stock availability of this product in our e-shop.

Check at eloziska.sk

Our e-shop · PO BEARINGS s.r.o.

Designation: LEF 205 2F

Cross references

ManufacturerDesignation / part number
GASPARDOF04100137R
FORTSCHRITT9902888270
SKFFYJ25TF
FAGFG56205
NTNUCF205D1
NSKUCF205
INARCJY25
FAGUCF205J7
SNRUCF205
RHPSF25
NSKUCF205D1
NTNM-UCF205D1
HUDJIKLEF 205 2F
ЧКЗ ОООLEF 205 2F
Навигатор НМ ОООLEF 205 2F
TANJIRACA KOMERCLEF 205 2F

Part numbers of other manufacturers and original equipment (OEM) that this product corresponds to.

What the designation means

2F
One lip rubber metal seal + flinger, on both sides
All prefixes and suffixes

Downloads

LEF 205 2F

Technical specifications

Dimensions and load ratings – symbols refer to the technical drawing.

SymbolParameterValue
dBore diameter25mm
LOverall width95mm
ADistance from the housing flange to the front of the inner ring of the bearing35.8mm
A1Total housing width27mm
A2Housing flange thickness12mm
JPitch circle diameter70mm
NDiameter of attachment slot12mm
kgMass0.73kg
CdynDynamic load rating14kN
CoStatic load rating7.8kN
PuFatigue load limit0.335kN
Sealing type

F SEAL / F SEAL (2F)

Dual sealing, protection cover placed on the inner ring protects against rough impurity particles and makes the labyrinth with the sheet part of the seal; then the sealing S type, with the labyrinth between the sheet part and the rubber lip that conducts the contact sealing. The friction and speeds are the same as with S but has much better protection against rough impurity particles. It is very good sealing system: the sheet part protects the seal from the soil, dust and rough particles. At the same time makes the labyrinth with the rubber part. The rubber part provides the contact sealing that prevents the penetration of the finer impurities, water, moisture, steam etc. Suitable for heavier conditions due to better protection against foreign matters. It is used with the Y bearings (standard).

Overview of all sealing types
Technical drawing – LEF 205 2F
Technical drawingClick to enlarge