Exclusive FKL distributor for the Slovak Republic

  1. Home
  2. Products
  3. Standard Program
  4. Y Bearings
  5. Bearing Type LE
  6. LE 211-200 2F

LE 211-200 2F

Y-Ball Bearings With Grub Screw Locking, Imperial size Bore diameter

50.8mm
d · Bore diameter
100mm
D · Outside diameter
43.6kN
Cdyn · Dynamic load rating
29kN
Co · Static load rating
0.94kg
kg · Mass

Price & availability

Check the current price and stock availability of this product in our e-shop.

Check at eloziska.sk

Our e-shop · PO BEARINGS s.r.o.

Designation: LE 211-200 2F

Cross references

ManufacturerDesignation / part number
SKFYAR 211-200-2F
INAGY1200-KRR-B-AS2/V
SNRUC211-32G2
NTNUC211-200D1
FAGUC211-32

Type equivalents according to FKL's interchange table (Ball Bearings and Bearing Units catalogue, section 3.3). Each designation has been checked for this size in that maker's own catalogue; compare the dimensions before ordering.

What the designation means

2F
One lip rubber metal seal + flinger, on both sides
All prefixes and suffixes

Downloads

LE 211-200 2F

Technical specifications

Dimensions and load ratings – symbols refer to the technical drawing.

SymbolParameterValue
dBore diameter50.8mm
dBore diameter2inch
DOutside diameter100mm
BWidth inner ring55.6mm
CWidth outer ring25mm
sDistance from inner ring side face to raceway centre22.2mm
d1Outer diameter inner ring69.1mm
EDistance from raceway centre to the hole for lubrication7mm
GsSet screw3/8-24 UNFinch
swHexagonal key size for set screw4.763mm
swHexagonal key size for set screw3/16inch
r1,2Inner ring Chamfer dimension1mm
r3,4Outside ring Chamfer dimension2mm
CdynDynamic load rating43.6kN
CoStatic load rating29kN
PuFatigue load limit1.25kN
kgMass0.94kg
Sealing type

F SEAL / F SEAL (2F)

Dual sealing, protection cover placed on the inner ring protects against rough impurity particles and makes the labyrinth with the sheet part of the seal; then the sealing S type, with the labyrinth between the sheet part and the rubber lip that conducts the contact sealing. The friction and speeds are the same as with S but has much better protection against rough impurity particles. It is very good sealing system: the sheet part protects the seal from the soil, dust and rough particles. At the same time makes the labyrinth with the rubber part. The rubber part provides the contact sealing that prevents the penetration of the finer impurities, water, moisture, steam etc. Suitable for heavier conditions due to better protection against foreign matters. It is used with the Y bearings (standard).

Overview of all sealing types
Technical drawing – LE 211-200 2F
Technical drawingClick to enlarge