Exclusive FKL distributor for the Slovak Republic

  1. Home
  2. Products
  3. Standard Program
  4. Y Bearings
  5. Bearing Type 172
  6. 1726204 2S

1726204 2S

Y-Ball Bearings With Standard Inner Ring

20mm
d · Bore diameter
47mm
D · Outside diameter
12.7kN
Cdyn · Dynamic load rating
6.55kN
Co · Static load rating

Price & availability

Check the current price and stock availability of this product in our e-shop.

Check at eloziska.sk

Our e-shop · PO BEARINGS s.r.o.

Designation: 1726204 2S

Cross references

ManufacturerDesignation / part number
Ростсельмаш КЗ1726204 2S

Part numbers of other manufacturers and original equipment (OEM) that this product corresponds to.

Equivalents of the standard version 1726204 2RS1

ManufacturerDesignation / part number
SKF1726204-2RS1
INA204-NPP-B
NTNCS204LLU

1726204 2S has the same mounting dimensions as the standard version 1726204 2RS1 and differs from it in its seals, lubrication or surface finish. Listed are the type equivalents of the standard version according to FKL's interchange table, checked in the makers' catalogues.

What the designation means

2S
One lip rubber metal seal (on both sides)
All prefixes and suffixes
1726204 2S

Technical specifications

Dimensions and load ratings – symbols refer to the technical drawing.

SymbolParameterValue
dBore diameter20mm
DOutside diameter47mm
BWidth inner ring14mm
CWidth outer ring14mm
d1Outer diameter inner ring28.2mm
CdynDynamic load rating12.7kN
CoStatic load rating6.55kN
PuFatigue load limit0.275kN
Sealing type

S SEAL / S SEAL (2S)

Single lip seal with the labyrinth between the sheet part and the rubber lip which conducts the contact sealing. The friction and speeds are the same as with RS but provides much better protection against the rough impurity particles. This is very good sealing system: the sheet part protects the seal from the soil, dust and rough particles. At the same time makes the labyrinth with the rubber part. The rubber part provides contact sealing which prevents penetration of finer impurities, water, moisture, steam etc. Suitable for neutral conditions because of the presence of the foreign materials. It is used with the Y bearing (standard) and deep groove ball bearings.

Overview of all sealing types
Technical drawing – 1726204 2S
Technical drawingClick to enlarge